Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

Unpack the SRX4120

Unpack the SRX4120 by following the recommended procedure and check that you have received all the components.

Unpack the SRX4120

We ship the SRX4120 in a cardboard carton, secured with foam packing material.

CAUTION:

The SRX4120 has maximum protection inside the shipping carton. Do not unpack the device until you are ready to mount it.

To unpack the device and prepare for installation, you need the following tools:

  • A Phillips (+) screwdriver, number 2

  • A box cutter or packing knife to slice open the tape that seals the boxes

To unpack the device:

  1. Move the shipping carton to a staging area as close to the installation site as possible, but where you have enough room to remove the device and its components.

  2. Position the carton so that the arrows marked on the carton are pointing up.

  3. Open the top flaps on the shipping carton.

  4. Pull out the packing material holding the device in place.

  5. Verify the parts received against the list in Packing List for the SRX4120.

  6. Save the shipping carton and packing materials in case you need to move or ship the device later.

Packing List for the SRX4120

The shipment includes a packing list. Check the parts you receive in the shipping carton against the items on the packing list. We ship the parts as per the configuration that you order.

If any part on the packing list is missing, contact your customer service representative or contact Juniper customer care from within the U.S. or Canada by telephone at 1-888-314-5822. For international-dial or direct-dial options in countries without toll-free numbers, see https://www.juniper.net/support/requesting-support.html.

Table 1: Parts List for the SRX4120
Component Part Number Quantity

SRX4120 Chassis

SRX4120-CHAS

1

Power supply unit

AC: JPSU-450W-AC

DC: JPSU-650W-DC-AFO

1

Fan modules

SRX-FAN-1RU-AFO

4

Rack mount kit

JNP-4P-TL-1RU-RMK

1

AC power cord that is appropriate for your geographic location

  

1 (only for AC models)

Documentation Roadmap/End User License Agreement (EULA)/Warranty card

  

1
Note:

We ship the SRX4120 with only one power supply unit (PSU). You can order the second power supply separately, if required.