Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

Unpack the QFX5140

Unpack the QFX5140 by following the recommended procedure and check that you have received all the components.

Unpack the QFX5140

We ship the QFX5140 in a cardboard carton, secured with foam packing material. The carton also includes an accessory box and a pointer card with links to the quick start instructions. You can use a box cutter or packing knife to slice open the tapes that seals the boxes.

CAUTION:

The QFX5140 has maximum protection inside the shipping carton. Do not unpack the device until you are ready to mount it.

To unpack the device:

  1. Move the shipping carton to a staging area as close to the installation site as possible. Also ensure that this area provides you with enough room to remove the device and its components.

  2. Position the carton so that the arrows marked on the carton are pointing up.

  3. Open the top flaps on the shipping carton.

  4. Pull out the packing material holding the device in place.

  5. Verify the parts received against the list.

  6. Save the shipping carton and packing materials in case you need to move or ship the device later.

Packing List for the QFX5140

The shipment includes a packing list. Check the parts you receive in the shipping carton against the items on the packing list. We ship the parts as per the configuration that you order.

If any part on the packing list is missing, contact your customer service representative or contact Juniper customer care from within the U.S. or Canada by telephone at 1-888-314-5822. For international-dial or direct-dial options in countries without toll-free numbers, see https://www.juniper.net/support/requesting-support.html.

Table 1: Parts List for the QFX5140 Base Configuration
Component Part Number Quantity

QFX5140 Chassis

QFX514024CD8OCHAS

1

Power supply modules (PSUs)

One of the following:

  • JPSU-1600W-1UACAFO

  • JPSU-1600W-1UACAFI

2

Fan modules

One of the following:

  • QFX5140-FANAO

  • QFX5140-FANAI

6

Accessory Kit (see Table 2)

–

1
Table 2: Parts List for the Accessory Kit
Component Quantity

Rack mount kit— JNP-4P-TL-1RU-RMK

1

Grounding ring terminal lug, right-angled and non-insulated

1

ESD wrist strap with cable

1

Documentation roadmap card

1
Table 3: Parts List for the Rack Mount Kit (JNP-4P-TL-1RU-RMK)
Component Quantity

Chassis Brackets

2 (one each for left and right sides)

Front-Mounting Rails

2 (one each for left and right sides)

Rear-Floating Rails

2 (one each for left and right sides)