PTX5000 Agency Approvals and Compliance Statements
PTX5000 Agency Approvals
The PTX5000 complies with the following standards:
Safety
CAN/CSA-22.2 No. 60950–1–07/UL 60950–1, 2nd Ed., Safety of Information Technology Equipment
EN 60825-1 Safety of Laser Products - Part 1: Equipment Classification, Requirements and User's Guide
EMC
AS/NZS 3548 Class A (Australia/New Zealand)
EN55022 Class A (Europe)
FCC Part 15 Class A (USA)
VCCI Class A (Japan)
Immunity
EN-61000-3-2 Power Line Harmonics
EN-61000-3-3 Voltage Fluctuations and Flicker
EN-61000-4-2 ESD
EN-61000-4-3 Radiated Immunity
EN-61000-4-4 EFT
EN-61000-4-5 Surge
EN-61000-4-6 Low Frequency Common Immunity
EN-61000-4-11 Voltage Dips and Sags
ETSI EN-300386-2 Telecommunication Network Equipment. Electromagnetic Compatibility Requirements
The PTX5000 is designed to comply with the following standard:
NEBS
GR-1089-Core: EMC and Electrical Safety for Network Telecommunications Equipment
SR-3580 NEBS Criteria Levels (Level 3 Compliance)
GR-63-Core: NEBS, Physical Protection
Compliance Statement for Argentina
EQUIPO DE USO IDÓNEO.
Compliance Statements for EMC Requirements
Canada
CAN ICES-3 (A)/NMB-3(A)
European Community
This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate measures.
Israel
Translation from Hebrew—Warning: This product is Class A. In residential environments, the product might cause radio interference, and in such a situation, the user might be required to take adequate measures.
Japan
The preceding translates as follows:
This is a Class A product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this product is used near a radio or television receiver in a domestic environment, it might cause radio interference. Install and use the equipment according to the instruction manual. VCCI-A.
United States
The hardware equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, might cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Compliance Statements for Environmental Requirements
Batteries in this product are not based on mercury, lead, or cadmium substances. The batteries used in this product are in compliance with EU Directives 91/157/EEC, 93/86/EEC, and 98/101/EEC. The product documentation includes instructional information about the proper method of reclamation and recycling.
PTX5000 Compliance Statements for NEBS
The equipment is suitable for installation as part of the Common Bonding Network (CBN).
The equipment is suitable for installation in locations where the National Electrical Code (NEC) applies.
The battery return connection is to be treated as an isolated DC return (DC-I), as defined in GR-1089-CORE.
You must provision a readily accessible device outside of the equipment to disconnect power. The device must also be rated based on local electrical code practice.
During power supply and air filter maintenance, the cover is intended to be removed from the chassis.
See Also
PTX5000 Compliance Statements for Acoustic Noise
Maschinenlärminformations-Verordnung - 3. GPSGV, der höchste Schalldruckpegel beträgt 70dB(A) oder weniger gemäss EN ISO 7779
Translation:
The emitted sound pressure is below 70dB(A) per EN ISO 7779.