Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Installing the Router Transport Kit on the MX2010 Router

Note:

The router transport kit can be purchased from Juniper Networks.

The router transport kit includes the following components:

  • Router transport platform

  • Router transport left and right mounting plates with adjustable wheel assembly

  • Router winch mount with winch strap plate

To install the router transport kit:

  1. Remove the router transport kit from the shipping crate (see Unpacking the MX2010 Router Transport Kit).
    Note:

    The router transport kit weighs approximately 138.5 lb (62.82 kg).

  2. Remove the winch strap plate that is secured to the winch mount by using a 9/16-in. (14 mm) socket wrench, and set the plate aside.
  3. Using a number 3 Phillips screwdriver, loosen the captive screws that secure the winch mount to the router transport kit, and set the mount aside.
  4. Using a number 3 Phillips screwdriver, loosen the captive screws that secure the router transport mounting plate and wheel assembly (left and right) to the router transport platform, and set them aside (see Figure 1).
    Figure 1: Preparing the Router Transport Kit for InstallationPreparing the Router Transport Kit for Installation
  5. Remove the four shipping brackets that secure the router to the shipping crate platform using a 9/16-in. (14 mm) socket wrench, and a number 2 Phillips screwdriver, and set the brackets aside.
  6. Align the left router transport mounting plate and wheel assembly (indicated by left arrow) with the holes on the left side of the chassis (see Figure 2).
  7. Using a number 3 Phillips screwdriver, tighten the captive screws to secure the router transport mounting plate and wheel assembly to the chassis.
  8. Align the right router transport mounting plate and wheel assembly (indicated by right arrow) with the holes on the right side of the chassis (see Figure 2).
  9. Using a number 3 Phillips screwdriver, tighten the captive screws to secure the router transport mounting plate and wheel assembly to the chassis.
    Figure 2: Installing the Router Transport Kit onto the MX2010 RouterInstalling the Router Transport Kit onto the MX2010 Router