Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

Reseat the Memory Module

CAUTION:

The memory modules on the ME-X2-M are not field-replaceable components. If the memory module on your device needs to be replaced, follow the Return Material Authorization (RMA) procedure.

Remove a Memory Module

Before you begin, remove the cover panel as described in Remove the Cover Panel.

To remove the memory module:
  1. Remove the air shroud. Hold the air shroud at both ends and carefully lift it out of the system.
    Internal layout of a server with labeled components like cooling fans, drive bays, and circuit boards. Green arrows show removal of a cover for maintenance.
  2. Press the ejectors on both ends of the memory module socket to the fully open position.
  3. Lift the released memory module out of the socket.
    Removing a RAM module from a motherboard by pressing down clips on both sides to unlock and lift the module.

Install a Memory Module

Before you begin, remove the cover panel as described in Remove the Cover Panel.

To install the memory module:
  1. If a memory module blank is installed in the memory module socket, remove the blank.
  2. Align the edge connector of the memory module with the alignment key of the memory module socket.

    There is only one correct orientation for the memory module.

  3. Carefully insert the memory module into the socket.
  4. Press the memory module with your thumbs until the ejectors lock into place.

    Confirm that the levers on the socket are aligned with the levers on the other sockets.

    g102898.png

After you have installed the memory module:

  • Install the air shroud.

    Align the tab on the air shroud with the slot on the device. Carefully lower the air shroud until it is fully seated.

    Technical illustration of a server chassis showing internal components including cooling fans, processors, memory slots, with green arrows indicating installation or removal of components.

  • Install the cover panel as described in Install the Cover Panel.