Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Power-On Options for the AP64

You can use any of the following options to power on the AP:

  • Power over Ethernet plus (PoE+) from an Ethernet switch

    We recommend that you use an Ethernet cable with a maximum length of 100 m to connect the access point (AP) to the switch port.

    If you use an Ethernet cable that is longer than 100 m by placing an Ethernet PoE+ extender in the path, the AP might power up, but the Ethernet link does not transmit data across such a long cable. You might see the status LED blink yellow twice indicating that the AP is unable to receive data from the switch.

  • PoE injector

See PoE Requirements for Juniper Mist APs for the power requirements for an AP64.