Pre-Installation Checklist

Before installing the access point, be sure that you have the following:

• A mount kit compatible with the AP and mount surface (see Access Point Installation)

• One Cat5e or better UTP cable with network access

Some optional items:

• A compatible power adapter with power cord

• A compatible PoE midspan injector with power cord

• An AP-CBL-SERU console cable

Also, make sure at least one of the following network services is supported:

• DNS server with an “A” record

• DHCP Server with vendor specific options

CAUTION

Access points are radio transmission devices and as such are subject to governmental regulation. Network administrators responsible for the configuration and operation of access points must comply with local broadcast regulations. Specifically, access points must use channel assignments appropriate to the location in which the access point will be used.