Access Point Installation
The HPE Networking AP-723H Dual Platform Hospitality Access Point is designed for desk, wall, or wall box mount. HPE Networking provides several mount kits to use with the access points. These mount kits are available as accessories and must be ordered separately.
|
Mount Kit |
Installation Guide |
|---|---|
|
Desk Mount (Large) |
720H Series Hospitality Access Point Desk Mount Kit Installation Guide |
|
Wall Mount (Single Gang) |
|
|
Wall Mount (Dual Gang) |
-
All HPE Networking access points should be professionally installed by a professional installer. The installer is responsible for ensuring that grounding is available and meets applicable national and electrical codes. Failure to properly install this product may result in physical injury and/or damage to property.
-
Tous les points d'accès HPE Networking doivent impérativement être installés par un professionnel agréé. Ce dernier doit s'assurer que l'appareil est mis à la terre et que le circuit de mise à la terre est conforme aux codes électriques nationaux en vigueur. Le fait de ne pas installer correctement ce produit peut entraîner des blessures corporelles et / ou des dommages matériels.
For indoor use only. The access point, AC adapter, and all connected cables are not to be installed outdoors. This stationary device is intended for stationary use in partly temperature controlled weather-protected environments (class 3.2 per ETSI 300 019).