adjust-threshold-activate-bandwidth
Syntax
adjust-threshold-activate-bandwidth bps;
Hierarchy Level
[edit logical-systems logical-system-name protocols mpls label-switched-path lsp-name auto-bandwidth], [edit protocols mpls label-switched-path lsp-name auto-bandwidth]
Description
Specify an absolute value to prevent automatic adjustment of signaled bandwidth and aggressive re-signaling of a label-switched path (LSP) when the actual bandwidth over the LSP is below the configured threshold, although the adjust-threshold percentage condition is satisfied.
Options
bps—Amount
of bandwidth that is compared with the maximum of all traffic samples
during an adjustment interval. If the maximum average bandwidth is
less than this configured value, automatic bandwidth adjustment or
re-signaling does not happen, even if the adjust-threshold percentage
condition is satisfied.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 14.1.