rfc2544-benchmarking
Junos OS Syntax (except for SRX Series Firewalls)
rfc2544-benchmarking { profiles { test-profile profile-name { test-type (throughput | latency | frame-loss | back-back-frames); packet-size bytes; step-percent percent; bandwidth-kbps kpbs; } } tests { test-name test-name { destination-ipv4-address address; destination-mac-address destination-mac-address; destination-udp-port port-number; direction (egress | ingress); disable-signature-check; dscp-code-points dscp-code-points; family (bridge| inet | ccc | vpls); forwarding-class forwarding-class; halt-on-prefix-down; in-service; ip-swap; ivlan-cfi ivlan-cfi; ivlan-id ivlan-id; ivlan-priority ivlan-priority; mode (initiate-and-terminate | reflect); outer-tag-protocol-id outer-tag-protocol-id; ovlan-cfi ovlan-cfi; ovlan-id ovlan-id; ovlan-priority ovlan-priority; packet-loss-priority (high | low | medium-high); receive-failure-threshold receive-failure-threshold; reflect-etype reflect-etype; reflect-mode (mac-rewrite | mac-swap | no-mac-swap); service-type (elan | eline); skip-arp-iteration; source-ipv4-address address; source-mac-address source-mac-address; source-udp-port port-number; test-finish-wait-duration test-finish-wait-duration; test-interface interface-name; test-iterator-duration test-iterator-duration; test-iterator-pass-threshold test-iterator-pass-threshold; test-profile test-profile; timestamp-format (microseconds | nanoseconds); transmit-failure-threshold transmit-failure-threshold; udp-tcp-port-swap; vlan-cfi vlan-cfi; vlan-id vlan-id; vlan-priority vlan-priority; } } }
Junos OS Syntax (SRX300 and SRX550HM)
rpm {
rfc2544-benchmarking {
tests {
test-name test-name {
destination-ipv4-address address;
destination-udp-port port-number;
disable-signature-check;
family inet
mode reflect;
source-ipv4-address address;
source-udp-port port-number;
test-interface interface-name;
}
}
}
}Hierarchy Level
[edit services rpm]
Description
Configure the parameters for the RFC 2544-based benchmarking test to examine and
analyze the performance characteristics of a network interconnecting device. You
must configure a test profile for the initiator (ACX routers only), which specifies
the type of test and the manner in which it must be performed, and associate the
test profile with a test name. The test name that you configure contains details,
such as the address family and the test mode
(initiate-and-terminate), for the test. You can associate the
same test profile with multiple test names. For a reflector, you need only configure
a test name and its associated details, and set the test mode to
reflect.
The remaining statements are explained separately. Search for a statement in CLI Explorer or click a linked statement in the Syntax section for details.
Required Privilege Level
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 12.3X52.