Install the License

In order to complete WebApp Secure configuration, you must install the license for the product. Use a web browser to connect to your appliance on port 5000 and log in using the Administrator credentials. These are the same credentials used for SSH / console access and for the Web UI.

Note: The configuration URL is: https://<IP address or hostname>:5000

Examples: https://10.11.12.13:5000 and https://webappsecure.mydomain.com:5000

From the Licensing window, you can obtain and add an evaluation license or you can install a full product license.

  1. In the Web UI, under Configuration, click on Licensing.
  2. To obtain a “self-service” evaluation license, click the Get Trial License button, fill out the form, and click Send Request. The license will be sent to you. You can add it using the instructions below.

    Figure 15: No License Found, Get Trial License

    No License Found, Get Trial License

    Figure 16: Trial License Form

    Trial License Form
  3. To add a license key, click the Add License button in the Licensing window and enter your key in the field provided. Then click Add.

    Figure 17: Add License

    Add License
  4. Review the Terms of Service.
  5. Check "I agree to the terms of service" to enable your WebApp Secure product and click Save License.

Note: If the license validation step fails, click the Test Connection to Licensing Server button. If the test fails, check the network settings, particularly proxy settings for the network. WebApp Secure must reach the outside world to contact the licensing server.

Note: If you have a license that is expired and you’ve requested a new license, you can click the Refresh Licenses button to update your license information.