Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Deploying Using the Web Interface

    To deploy using the Web Interface, do the following:

    1. Log into the AWS management console.
    2. Select the Amazon EC2 tab.
    3. Click the Launch Instance button under the My Instances section.
    4. Select Launch Classic Wizard then click continue.
    5. Select the My AMIs tab.
    6. Next to Viewing, select Private Images.
    7. To the right of the appliance, click the Select button.

      Figure 1: AWS management console

      AWS management console
    8. Change the Instance Type to Large (m1.large).

      Figure 2: Instance Type

      Instance Type
    9. Click the Continue button. Then click the Continue button again on the next screen.

      Figure 3: Configure Instance continued

      Configure Instance continued
    10. Add a Name to make the instance easily recognizable and click Continue.

      Figure 4: Instance, Configure Name

      Instance, Configure Name
    11. Select or create your Key Pair and click Continue.

      Figure 5: Instance, Create Key Pair

      Instance, Create Key Pair
    12. Select Create a New Security Group and enter the following information:
      • Group Name: Mykonos
      • Group Description: Mykonos Appliance
      • Port Range: 2022
      • Port Range: 80
        • Add Rule
      • Port Range: 443
        • Add Rule
      • Port Range: 5000
        • Add Rule

      Figure 6: Instance Create Security Group

      Instance Create Security Group
    13. Click the Continue button.
    14. Click the Launch button.

      Figure 7: Instance, Review and Launch

      Instance, Review and Launch

    Published: 2014-06-27