Supporting SIM, SIGTRAN, and Other Protocols with Signalware
Steel-Belted Radius Carrier nodes that support SIM depend on Signalware 9 with Service Pack 6V software being properly installed on the Solaris server.
Also, if the EAP-AKA authentication protocol is used by the WiMAX mobility module, Signalware 9 with Service Pack 6V is required.
We strongly recommend that Signalware software be installed and configured before Steel-Belted Radius Carrier is installed because the SBR Carrier installation incorporates Signalware settings, if they are available.
Juniper Networks provides an example Signalware installation with:
The correct settings for simple integration with Steel-Belted Radius Carrier.
The recommended procedures to configure Signalware 9 to support Steel-Belted Radius Carrier.
The recommended procedure for migrating configuration settings forward from an existing Signalware installation.
For details, see SIGTRAN Support for Steel-Belted Radius Carrier.