Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring the Platform

 

To configure the platform:

  1. From the Initial Install screen, enter 2 to select Configure Platform.

    The Configure Platform screen is displayed.

  2. Enter 0 to accept the install directory that you entered earlier.

    The Information Section screen is displayed.

  3. Press Enter to accept the default Yes to answer the Continue with configurePlatform procedure? prompt.

    The CE Configuration screen is displayed.

  4. Enter 1. (No other entry is supported.)

    The UDP/TCP Port Configuration screen is displayed. It prompts you for a UDP port value.

  5. We recommend that you press Enter to accept the default UDP port base value, but you may enter an alternate.

    The UDP/TCP Port Configuration screen prompts you for a TCP port value.

  6. We recommend that you press Enter to accept the default TCP port base value, but you may enter an alternate.

    A confirmation screen prompts you to apply the configuration.

    Press Enter to accept the default Yes.

    A configurePlatform completed successfully message is displayed.

  7. Press Enter.

    The Initial Install screen is displayed.