JSA3800 Chassis

JSA3800 Appliance Front Panel Description

Figure 1 shows the front panel components of the JSA3800 appliance.

Table 1 provides information about the front panel components of the JSA3800 appliance.

Table 1: JSA3800 Front Panel Components

Callout	Component	Description
1	Front bezel	Protects the appliance.
2	Lock	Locks the appliance.
3	Hard drive	Six 900 GB hard disk drives (Drive0 - Drive5). Drive1 (top left) and Drive0 (bottom left) Drive3 (top middle) and Drive2 (bottom middle) Drive5 (top right) and Drive4 (bottom right)
4	USB ports	2 USB ports that accept a USB storage device.
5	RESET button	Reboots the appliance.
6	Power button	Powers on or powers off the appliance.
7	Chassis LEDs	Provides the colors and states, and the status they indicate.
8	UID button	Turns on or off the blue light function of the U-LED when used with a UID-compatible motherboard. Once the blue light is activated, you can easily locate the appliance in very large racks and server banks.
9	Empty slots	Empty hard drive slots.

Figure 2 shows the front panel LEDs of the JSA3800 appliance.

Table 2 lists the JSA3800 front panel LEDs.

Table 2: JSA3800 Front Panel LEDs

Callout	LEDs	Description
1	Information	Red (blinking)—Indicates a fan failure. Solid red—Indicates an overheat condition, which might be caused by cables obstructing the airflow in the system or the ambient room temperature being too warm. Red (slowly blinking)—Indicates a power failure. Solid Blue—Indicates that the local UID button is depressed. Blue (blinking)—Indicates IPMI-activated UID.
2	LAN2	When blinking, it indicates DataShare interface activity.
3	LAN1	When blinking, it indicates Management interface activity.
4	Hard drive	Unused.
5	Power	Solid green—Indicates that the appliance is receiving power.

Figure 3 shows the back panel components of the JSA3800 appliance.

Table 3 provides information about the back panel components of the JSA3800 appliance.

Table 3: JSA3800 Back Panel Components

Callout	Components	Description
1	Power supply	Provides power to all components.
2	Dedicated IPMI LAN port	1 dedicated IPMI LAN port.
3	GB ports	2 RJ-45 Gigabit Ethernet LAN ports. The left Ethernet port is Eth0 and the right Ethernet port is Eth1. Note: You can choose any GB ports as the management port.
4	10 GB+SFP ports	2 SFP+ 10GbE LAN ports.
5	VGA port	1 VGA port. Note: This port is not supported.
6	GB ports	2 RJ-45 Gigabit Ethernet LAN ports. Note: You can choose any GB ports as the management port.
7	USB ports	4 USB ports.
8	COM port	1 DB-9 COM port.

Figure 4 shows the back panel Ethernet port LEDs of the JSA3800 appliance.

Table 4 lists the JSA3800 Ethernet port LEDs.

Table 4: JSA3800 Ethernet Port LEDs

Callout	LEDs	Description
1	Link	Off—Indicates no connection or the speed of the connection is 10 Mbps. Green—Indicates that the speed of the connection is 100 Mbps. Amber—Indicates that the speed of the connection is 1 Gbps.
2	Activity	Indicates link activity.