Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Replacing the Fan on the JSA3800 Appliance

    The JSA3800 appliances have two cooling fans. The fans are hot-swappable.

    Reviewer: AS per the team, the user cannot replace the fans. But again confirm if we need to document this topic

    To remove and install the fan for JSA3800:

    1. Attach an ESD grounding strap to your bare wrist and connect the strap to the ESD point on the chassis.
    2. Turn the screws to the left on the fan door at the top of the device as shown in Figure 1.

      Figure 1: Opening the Chassis Lid

      Opening the Chassis Lid
    3. Open the lid as shown in Figure 1.
    4. Pull the lever out as shown in Figure 2.
    5. Grasp the fan protected with the cover and pull it out to disengage its power connection as shown in Figure 2.

      Figure 2: Removing the Fan

      Removing the Fan
    6. Wait for the fan to stop spinning.

      Warning: To avoid injury, do not proceed until the fan has stopped spinning.

    7. Replace the fan and then close the lever as shown in Figure 3.

      Figure 3: Replacing the Fan

      Replacing the Fan
    8. Install the fan in the device as shown in Figure 3.
    9. Engage the fan lever to secure the fan in place.
    10. Close the fan lid and tighten the screws to secure it in the chassis.

    Published: 2015-03-18