Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 

Step 2: Connecting the Management Device

You can connect external devices using the ports on the back panel of the appliance.

  1. If you use a laptop, connect the laptop to the DB-9 serial COM port on the back panel.

    Note: When using a laptop to connect to the appliance, you must use a terminal program, such as HyperTerminal, to connect to the appliance.

    Note: If your laptop or PC does not have a DB-9 male connector pin and you want to connect your laptop or PC directly to the JSA7800 appliance, use a combination of a USB to DB-9 male adapter and a DB-9 F/F cable.

  2. Select the appropriate COM port to use.

  3. Configure the following COM port settings:

    • Bits per second = 9600

    • Stop bits =1

    • Data bits = 8

    • Parity = None

Modified: 2018-05-14