Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 

Step 1: Powering On the Appliance

Caution: Before connecting the appliance to the power supply, attach an ESD strap to an ESD point and place the other end of the strap around your bare wrist.

  1. Plug the power cord into the AC receptacle on the rear panel. If your appliance contains two power supplies, plug a power cord into each AC receptacle.

    Note: Grounding for the appliances is provided through the power supply ground terminal. Ensure that you connect the AC power supply module in the appliance to a grounded AC power outlet by using an AC power cord (with the grounding pin) appropriate for your geographical location.

  2. Plug the other end of the power cord into a wall socket.

  3. Press the Power button on the front panel.

  4. Note the following indications:

    LED

    State

    Power

    Solid green— Indicates that the appliance is receiving power.

    Hard drive

    Unused

    LAN

    • LAN1— Indicates eno1 interface activity when blinking.

    • LAN2— Indicates eno2 interface activity when blinking.

    Information

    • Red (blinking)— Indicates a fan failure.

    • Solid red— Indicates an overheat condition, which might be caused by cables obstructing the airflow in the system or the ambient room temperature being too warm.

    • Red (slowly blinking)— Indicates a power failure.

    • Solid blue —Indicates UID function is activated.

    Alert/Power Fail

    • Solid red— Indicates a power supply failure.

    • Amber— Indicates that the appliance is operating normally.

Modified: 2018-05-14