JATP700 Appliance Back Panel Description
Figure 1 shows the back panel components of the JATP700 appliance.
Figure 1: JATP700 Back Panel

Table 1 lists the back panel components of the JATP700 appliance.
Table 1: JATP700 Back Panel Components
Callout | Components | Description |
---|---|---|
1 | Power supply | Provides power to all components. |
2 | Dedicated IPMI LAN port | 1 RJ-45 dedicated Intelligent Platform Management Interface (IPMI) LAN port. |
3 | 1-Gigabit Ethernet ports | 4 RJ-45 1-Gigabit Ethernet LAN ports. Top right: eth2 or alternate exhaust interface When you configure 1-GB ports through CLI, bottom left port (GLAN1) is eth0 and bottom right port (GLAN2) is eth1. |
4 | 10-Gigabit Ethernet SFP+ ports | 2 10-Gigabit Ethernet SFP+ ports. The top port is eth1 by default. |
5 | VGA port | 1 VGA port. Note: This port is not supported. |
6 | USB ports | 4 USB ports. Top left: port 1; top right: port 3 Bottom left: port 0; bottom right: port 2 |
7 | COM port | 1 DB-9 COM port. |
Figure 2 shows the back panel Ethernet port LEDs of the JATP700 appliance.
Figure 2: JATP700 Ethernet Port LEDs

Table 2 lists the JATP700 Ethernet port LEDs.
Table 2: JATP700 Ethernet Port LEDs
Callout | LEDs | Description |
---|---|---|
1 | Link/Activity |
|
2 | Speed |
|
Table 3 lists the JATP700 IPMI port LEDs.
Table 3: JATP700 IPMI Port LEDs
LEDs | Description |
---|---|
Link (left) | Green—Indicates that the speed of the connection is 100 Mbps. |
Activity (right) | Amber (blinking)—Indicates link activity. |
Table 4 lists the JATP700 SFP+ port LEDs.
Table 4: JATP700 SFP+ Port LEDs
LEDs | Description |
---|---|
Link (top) |
|
Activity (bottom) | Green (blinking)—Indicates link activity. |