Add a Static NAT
You are here: Configure > Security Services > NAT > Static.
To add a static rule:
- Click the add icon (+) on the right side of
the Rules page after creating the Rule Set page.
The Add Rule page appears.
- Complete the configuration according to the guidelines provided in Table 1.
- Click OK to save the changes. If you want to discard your changes, click Cancel.
Table 1: Fields on the Add Static Rule Page
Field | Action |
---|---|
Rule Name | Specifies the name of the rule. Enter the rule name. |
Rule Description | Specifies a description for the rule. Enter a description for the rule. |
Match Destination Address | |
IPv4 | Enter the IPv4 address. |
IPv6 | Enter the IPv6 address. |
Then | |
Static Prefix | Enter the static prefix address. |
Routing Instance | Select a routing instance. |