Add a Tenant
You are here: Device Administration > Multi Tenancy > Tenants.
To add a tenant:
- Click the add icon (+) on the upper right side
of the Tenants page.
The Create Tenant page appears.
- Complete the configuration according to the guidelines provided in Table 1.
- Click OK to save the changes. If you want to discard your changes, click Cancel.
Table 1: Fields on the Create Tenant Page
Field | Description |
---|---|
General Details | |
Name | Enter a name for the tenant. Enter a unique string of alphanumeric characters, colons, periods, dashes, and underscores. No spaces are allowed; maximum length is 63 characters. |
Routing Instance | By default, the tenant name is taken as the routing instance name. |
Tenant Resource Profile | |
Profile Name | Displays the name of the resource profile. |
Configured Resources | Displays the resources and its reserved or maximum quantity assigned for this resource profile. |
Logical Systems/Tenants | Displays other logical systems and/or tenants using this resource profile. |
Click one:
See Add a Resource Profile for details on creating and editing resource profile. | |
User Details You can define tenant administrators and users. Click one:
| |
Create-Edit users | |
Username | Enter a username. Maximum length is 64 characters. |
Role | Select an option from the list to specify the role of the user:
|
Password | Specify the password for the user. |
Confirm Password | Confirm the password. |
Assign Interfaces Only one logical interface can be part of one tenant, whereas a tenant can have multiple logical interfaces. Click One:
| |
Create-Edit logical interfaces | |
General | |
Physical Interface Name | Displays the name of the Physical Interface. |
Logical Interface Unit | Enter the logical interface unit. |
Description | Enter the description. |
VLAN ID | Enter the VLAN ID. VLAN ID is mandatory. |
IPV4 Address | |
IPV4 Address | Click + and enter a valid IP address. |
Subnet Mask | Enter a valid subnet mask. |
Delete | Select the IPv4 address and click the delete icon to delete the address. |
IPV6 Address | |
IPV6 Address | Enter a valid IP address. |
Subnet Mask | Enter a valid subnet mask. |
Delete | Select the IPv6 address and click the delete icon to delete the address. |
Zone Configuration Click One:
| |
Create-Edit Security Zones | |
General | |
Name | Enter a valid name of the zone. |
Description | Enter a description of the zone. |
Application Tracking | Enables the application tracking support. |
Source Identity Log | Enable source identity log for this zone. |
Interfaces | Select an interface from the Available column and move it to Selected column. |
Selected interfaces | Displays the selected interfaces. |
System Services Options | Select system services from the following options: Note: Select the Except check box to allow services other than the selected services.
|
Protocols | Select a protocol from the following options: Note: Select the Except check box to allow protocols other than the selected protocols.
|
Traffic Control Options | Enable this option to send RST for NON-SYN packet not matching TCP session. |