Monitor RIP Information
You are here: Monitor > Routing > RIP Information.
Use this page to view RIP routing information, including a summary of RIP neighbors and statistics.
Table 1 describes the fields on the RIP Information page.
Table 1: Fields on the RIP Information Page
The RIP protocol name.
The port on which RIP is enabled.
Hold down time
The interval during which routes are neither advertised nor updated.
Global routes learned
Number of RIP routes learned on the logical interface.
Global routes hold down
Number of RIP routes that are not advertised or updated during the hold-down interval.
Global request dropped
Number of requests dropped.
Global responses dropped
Number of responses dropped.
Tab used to view the details of the interface on which RIP is enabled.
Name of the RIP neighbor.
Note: This value is the name of the interface on which RIP is enabled. Click the name to see the details for this neighbor.
State of the RIP connection: Up or Dn (Down).
Local source address.
This value is the configured address of the interface on which RIP is enabled.
This value is the configured address of the immediate RIP adjacency.
The mode of sending RIP messages.
The mode in which messages are received.
Value of the in coming metric configured for the RIP neighbor.