Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

ON THIS PAGE

Release Notes for Juniper Security Director Insights

 

Product Compatibility

This section describes the supported hardware and software versions for Juniper Security Director Insights. For Security Director requirements, see the Security Director 22.1R1 Release Notes.

Supported Security Director Software Versions

Security Director Insights is supported only on specific Security Director software versions as shown in Table 1.

Table 1: Supported Security Director Software Versions

Security Director Insights Software Version

Compatible with Security Director Software Version

22.1R1

22.1R1

Note

The times zones set for Security Director and Security Director Insights must be the same.

Virtual Machine Specification

Security Director Insights requires VMware ESXi server version 6.5 or later to support a virtual machine (VM) with the following configuration:

  • 8 CPUs

  • 24-GB RAM

  • 1.2-TB disk space

Supported Browser Versions

Security Director and Juniper Security Director Insights are best viewed on the following browsers.

  • Mozilla Firefox

  • Google Chrome

  • Microsoft Internet Explorer 11

Installation Instructions

For more information about installing Security Director Insights 22.1R1, see Deploy and Configure Security Director Insights with Open Virtualization Appliance (OVA) Files.

Upgrade Instructions

Table 2 shows Security Director Insights upgrade path.

Table 2: Upgrade Path

Upgrading to Release

Upgrade Path

Description

Security Director Insights 22.1R1

21.3R1 > 22.1R1

You can upgrade from the following release:

  • Security Director Insights Release 21.3R1

Security Director Insights 21.3R1

21.2R1 > 21.3R1

You can upgrade from the following release:

  • Security Director Insights Release 21.2R1

Security Director Insights 21.2R1

21.1R1 > 21.2R1

You can upgrade from the following release:

  • Security Director Insights Release 21.1R1

Security Director Insights 21.1R1

20.3R1 > 21.1R1

You can upgrade from the following release:

  • Security Director Insights Release 20.3R1

To upgrade from a previous version of Security Director Insights:

  1. Download the release image from the download site to a location (virtual machine) that is accessible from Security Director Insights.
  2. Type server to switch to the server mode of CLI.
  3. Copy the upgrade package to Security Director Insights:

    set system-update copy user@ip_addr:/location.

    Figure 1: Copy the Upgrade Package
    Copy the Upgrade Package
    Note

    You can host the upgrade file to any location that is accessible by secure copy protocol (scp).

  4. Check the copy progress:

    show system-update copy.

    Figure 2: Check Copy Progress
    Check Copy Progress
  5. Check the available upgrade versions:

    show system-update versions.

    Figure 3: Available Upgrade Versions
    Available Upgrade Versions
  6. Start the upgrade process:

    set system-update start software <version-number>.

    Use the <tab> key to select the software version number.

    Figure 4: Start Upgrade Process
    Start Upgrade Process
  7. Monitor the status of upgrade:

    show system-update status.

    Figure 5: Monitor Upgrade Status
    Monitor Upgrade Status

Known Issues

There are no known issues in Security Director Insights Release 22.1R1.

Resolved Issues

This section lists the issues fixed in Security Director Insights Release 22.1R1.

  • CON-1248 Not able to enable Security Director Insights high availability (HA). It fails with an error “Server is not reachable or down”.

  • CON-1284 Adding Policy Enforcer to Junos Space is failing.

  • CON-1291 Kafka error is encountered when Security Director Insights is upgrade to Security Director Insights Release 22.1.

  • CON-1293 Performance of Security Director Insights Release 22.1 is not as expected.

  • CON-1279 After upgrading to Security Director Insights Release 22.1, an error “unable to add log collector” is encountered when you try to add Security Director Insights as a logging node in Security Director.

Hot Patch Releases

This section describes the resolved issues in Security Director Insights Release 22.1R1 hot patch.

Resolved Issues in the Hot Patches

Table 3 lists the resolved issues in Security Director Insights Release 22.1R1 hot patch.

Table 3: Resolved Issues in Hot Patches

PR

Description

CON-1459

Security Director Insights source IP address is showing incorrect country.

PR1648703

Inconsistency in the number of events exported from Security Director to the CSV files.