Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Trend Micro Deep Security

 

The JSA DSM for Trend Micro Deep Security can collect logs from your Trend Micro Deep Security server.

The following table identifies the specifications for the Trend Micro Deep Security DSM:

Table 1: Trend Micro Deep Security DSM Specifications

Specification

Value

Manufacturer

Trend Micro

DSM name

Trend Micro Deep Security

RPM file name

DSM-TrendMicroDeepSecurity-

JSA_version-build_number.noarch.rpm

Supported versions

9.6.1532+

V10.0.1962

V10.1

Event format

Log Event Extended Format

Recorded event types

Anti-Malware

Deep Security

Firewall

Integrity Monitor

Intrusion Prevention

Log Inspection

System

Web Reputation

Automatically discovered?

Yes

Includes identity?

No

Includes custom properties?

No

More information

Trend Micro website (https://www.trendmicro.com/us/)

To integrate Trend Micro Deep Security with JSA, complete the following steps:

  1. If automatic updates are not enabled, download and install the most recent version of the following RPMs on your JSA console:

    • Trend Micro Deep Security DSM RPM

    • DSMCommon RPM

  2. Configure your Trend Micro Deep Security device to send syslog events to JSA.

  3. If JSA does not automatically detect the log source, add a Trend Micro Deep Security DSM log source on the JSA Console. The following table describes the parameters that require specific values for Trend Micro Deep Security DSM event collection:

    Table 2: Trend Micro Deep Security DSM Log Source Parameters

    Parameter

    Value

    Log Source type

    Trend Micro Deep Security

    Protocol Configuration

    Syslog

Configuring Trend Micro Deep Security to Communicate with JSA

To collect all events from Trend Micro Deep Security, you must specify JSA as the Syslog server and configure the Syslog format on your Trend Micro Deep Security device.

Ensure that Deep Security Manager is installed and configured on your Trend Micro Deep Security Device.

  1. Click Administration >System Settings >SIEM .
  2. From the System Event Notification (from the Manager) pane in the Manager section, enable the Forward System Events to remote computer (via Syslog) option.
  3. Type the host name or the IP address of the JSA system.
  4. Type 514 for the UDP port.
  5. Select the Syslog Facility that you want to use.
  6. Select LEEF for the Syslog Format.Note

    Trend Micro Deep Security sends events only in LEEF format from the Deep Security Manager. If you select the Direct forward option on the SIEM tab, you cannot select Log Event Extended Format 2.0 for the Syslog Format.

Sample Event Message

Use this sample event message to verify a successful integration with JSA.

Note

Due to formatting issues, paste the message format into a text editor and then remove any carriage returns or line feed characters.

Trend Micro Deep Security sample message when you use the Syslog protocol

<>Jul 14 01:32:31 trendmicro.deepsecurity.test LEEF:2.0|Trend Micro|Deep Security Mana ger|11.0.221|851|cat=System name=Reconnaissance Detected: Network or Port Scan desc=The A gent/Appliance detected an attempt to scan a computer or a network. Check the Agent/Appliance Events to see the details of the scan. sev=6 src=192.168.187.196 usrName=qradar targe t=testTarget6 msg=The Agent/Appliance detected an attempt to scan a computer or a network. Chec k the Agent/Appliance Events to see the details of the scan. TrendMicroDsTenant=Primary T rendMicroDsTenantId=0