Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

ON THIS PAGE

Juniper Networks Firewall and VPN

 

The Juniper Networks Firewall and VPN DSM for JSA accepts Juniper Firewall and VPN events by using UDP syslog.

JSA records all relevant firewall and VPN events.

Note

TCP syslog is not supported. You must use UDP syslog.

You can configure your Juniper Networks Firewall and VPN device to export events to JSA.

  1. Log in to your Juniper Networks Firewall and VPN user interface.
  2. Select Configuration >Report Settings >Syslog.
  3. Select the Enable Syslog Messages check box.
  4. Type the IP address of your JSA console or Event Collector.
  5. Click Apply.

    You are now ready to configure the log source in JSA.

Configuring JSA to Receive Events

You can configure JSA to receive events from a Juniper Networks Firewall and VPN device.

  1. From the Log Source Type list, select Juniper Networks Firewall and VPN option.

    For more information about your Juniper Networks Firewall and VPN device, see your Juniper documentation.