Installing and Upgrading the WinCollect Application on JSA Appliances
To manage a deployment of WinCollect agents from the JSA user interface, you must first upgrade your JSA Console to a supported version of WinCollect by using the WinCollect Agent SFS Bundle. This bundle includes the required protocols to enable communication between JSA and the managed WinCollect agents on the Windows hosts. Both the JSA Console and managed WinCollect agents can be upgraded to newer versions of WinCollect by installing the newer version of SFS Bundle on the JSA console.
For information about upgrading WinCollect versions v7.0 through v7.1.0, see https://support.juniper.net/support/downloads/.
If WinCollect 7.2.6 or later is installed on the JSA Console, and then you upgrade JSA from 2014.8 to 7.3.0 or later, the version of WinCollect on JSA reverts to 7.2.5. The managed WinCollect agents that are running on your Windows hosts remain at their current version and continue to send events to JSA using their existing configuration information. However, they no longer receive code or configuration updates. You must reinstall a version of the WinCollect Agent SFS Bundle that is the same as or newer than your current agents' version on your JSA Console after the JSA upgrade.
After you upgrade a JSA Console, the managed WinCollect agents that are enabled to receive automatic updates automatically upgrade to the new version of WinCollect at the next configuration polling interval. If new WinCollect agent files are available for download, the agent downloads, installs updates, and restarts required services. No events are lost when you update your WinCollect agent because events are buffered to disk. Event collection forwarding continues when the WinCollect service on the Windows host restarts.
reinstall JSA on your Console, you must delete this file
on any existing WinCollect agent installations before WinCollect can
Program Files/IBM/WinCollect/ config/ConfigurationServer.PEM
- Download the WinCollect Agent SFS bundle installation file from https://support.juniper.net/support/downloads/.
- Using a program such as WinSCP, copy the installation file to your JSA system.
- Log in to JSA as the root user.
- For initial installations, create the
/media/updatesdirectories if they do not exist. Type the following commands:
- Using a
program such as WinSCP, copy the downloaded SFS file to
/storetmpon your JSA console.
- To change to the /storetmp directory, type the
- To mount the SFS file, type the following command:
mount -t squashfs -o loop Installer_file_name.sfs /media/updates
mount -t squashfs -o loop
- To change to the
/media/patchdirectory, type the following command:
- To install WinCollect, type the following
command and then follow the prompts:
- In the JSA admin settings, click Advanced > Deploy Full Configuration.
- If you are using JSA 7.3.1 or later, click Advanced > Restart Event Collection Services.
- Verify that WinCollect agents are configured to accept
Log in to JSA.
On the navigation menu, click Data Sources.
Click the WinCollect icon.
Review the Automatic Updates Enabled column and select Wincollect agents that have a False value.
Click Enable/Disable Automatic Updates.
Managed WinCollect agents with automatic updates enabled are updated and restarted. The amount of time it takes a managed agent to update depends on the configuration polling interval for the WinCollect and the speed of the network connections between the Console and the agent.