Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

HP Networking ProVision

 

JSA Risk Manager supports the HP Networking ProVision adapter.

The following features are available with the HP Networking ProVision adapter:

  • Neighbor data support

  • SNMP discovery

  • RIP dynamic routing

  • Telnet and SSH connection protocols

The following table describes the integration requirements for the HP Networking ProVision adapter.

Table 1: Integration Requirements for the HP Networking ProVision Adapter

Integration requirement

Description

Versions

HP Networking ProVision Switches K/KA.15.X

Note: HP switches that run a Comware operating system are not supported by this adapter.

SNMP discovery

Matches version numbers with the format HP(.*)Switch(.*)(revision [A-Z]{1,2}\.(\d+)\.(\d+)) in sysDescr.

Required credential parameters

To add credentials in JSA, log in as an administrator and use Configuration Source Management on the Admin tab.

Username

Password

Enable Password

Supported connection protocols

To add protocols in JSA, log in as an administrator and use Configuration Source Management on the Admin tab.

SSH

Backup operation commands that are issued by the adapter to the device

dmesgshow system power-supply

getmib

show access-list vlan <vlan id>

show access-list

show access-list <name or number>

show access-list ports <port number>

show config

show filter

show filter <id>

show running-config

show interfaces brief

show interfaces <interface id> For each interface.

show jumbos

show trunks

show lacp

show module

show snmp-server

show spanning-tree

show spanning-tree config

show spanning-tree instance <id or list> (for each spanning-tree that is configured on the device)

show spanning-tree mst-config

show system information

show version

show vlans

show vlans <id> (for each vlan)

show vrrp

walkmib

show ip backup operation commands that are issued by the adapter to the device

show ip

show ip route

show ip odpf

show ip odpf redistribute

show ip rip

show ip rip redistribute

Telemetry and neighbor data commands

getmib

show arp

show cdp neighbors

show cdp neighbors detail <port number>

show interfaces brief

show interface

show ip route

show lldp info remote-device

show lldp info remote-device <port number>

show mac-address or show mac address

show system information

show vlans

show vlans custom id state ipaddr ipmask

walkmib