Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

F5 BIG-IP

 

JSA Risk Manager supports the F5 BIG-IP adapter.

The following features are available with the F5 BIG-IP adapter:

  • Neighbor data support

  • Dynamic NAT

  • Static NAT

  • SNMP discovery

  • Static routing

  • IPv6 support

F5 BIG-IP load balancer appliances that run the Local Traffic Manager (LTM) are supported.

The following table describes the integration requirements for the F5 BIG-IP adapter.

Table 1: Integration Requirements for the F5 BIG-IP Adapter

Integration requirement

Description

Versions

10.1 - 13.1

SNMP discovery

Matches F5 BIG-IP in sysOid containing 1.3.6.1.4.1.3375.2

Required credential parameters

To add credentials in JSA log in as an administrator and use Configuration Source Management on the Admin tab.

Username

Password

Supported connection protocols

To add protocols in JSA, log in as an administrator and use Configuration Source Management on the Admin tab.

SSH

Version 11 and later (tmsh) backup commands

Note: On version 10, the adapter sends Bigpipe commands. On versions 11 and later, the adapter sends tmsh commands.

list sys global-settings hostname

list sys management-ip show sys memory

show sys hardware

show sys version

list sys db packetfilter

list sys db packetfilter.defaultaction

list sys db snat.anyipprotocol

list net interface all-properties

list net trunk

list net packet-filter

list net vlan all-properties

show net vlan

list net vlan-group all all-properties

show net vlan-group

list itm virtual

list itm nat

list itm snatpool

list itm snat

list net route

list itm pool

list net self