Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Cisco CatOS

 

JSA Risk Manager supports the Cisco Catalyst (CatOS) adapter.

The Cisco CatOS adapter collects device configurations by backing up CatOS network devices that JSA Risk Manager can access.

The following features are available with the Cisco CatOS adapter:

  • Neighbor data support

  • SNMP discovery

  • Static routing

  • Telnet and SSH connection protocols

The following table describes the integration requirements for the Cisco CatOS adapter.

Table 1: Integration Requirements for the Cisco CatOS Adapter

Integration requirement

Description

Versions

Catalyst 6500 series chassis devices.

4.2

6.4

Note: The adapter for CatOS backs up only the essential switching port structure.

Multilayer Switch Feature Card (MSFC) CatOS adapters are backed up by Cisco IOS adapters.

Firewall Services Module (FWSM) CatOS adapters are backed up by Cisco ASA adapters.

SNMP discovery

Matches CATOS or Catalyst Operating System in SNMP sysDescr.

Required credential parameters

To add credentials in JSA log in as an administrator and use Configuration Source Management on the Admin tab.

Username

Password

Enable Password

Supported connection protocols

To add protocols in JSA log in as an administrator and use Configuration Source Management on the Admin tab.

Use any one of the following supported connection protocols:

Telnet

SSH

Commands that the adapter requires to log in and collect data

show version

whichboot

show module

show mod ver

show system

show flash devices

show flash ...

show snmp ifalias

show port ifindex

show interface

show port

show spantree

show ip route

show vlan

show vtp domain

show arp

show cdp

show cam dynamic

show port status

show counters