Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Pulse Secure Pulse Connect Secure

 

The JSA DSM for Pulse Secure Pulse Connect Secure collects syslog and WebTrends Enhanced Log File (WELF) formatted events from Pulse Secure Pulse Connect Secure mobile VPN devices.

The following table describes the specifications for the Pulse Secure Pulse Connect Secure DSM:

Table 1: Pulse Secure Pulse Connect Secure DSM Specifications

Specification

Value

Manufacturer

Pulse Secure

DSM name

Pulse Secure Pulse Connect Secure

RPM file name

DSM-PulseSecurePulseConnectSecure-

JSA_version-build_number.noarch.rpm

Supported versions

8.2R5

Protocol

Syslog, TLS Syslog

Event format

Admin

Authentication

System

Network

Error

Recorded event types

All events

Automatically discovered?

Yes

Includes identity?

Yes

Includes custom properties?

Yes

More information

Pulse Secure website (https://www.pulsesecure.net)

To integrate Pulse Secure Pulse Connect Secure with JSA, complete the following steps:

  1. If automatic updates are not enabled, RPMs are available for download from the Juniper support website. Download and install the most recent version of the Pulse Secure Pulse Connect Secure DSM RPM on your JSA console.

  2. Configure your Pulse Secure Pulse Connect Secure device to send WebTrends Enhanced Log File (WELF) formatted events to JSA.

  3. Configure your Pulse Secure Pulse Connect Secure device to send syslog events to JSA.

  4. If JSA does not automatically detect the log source, add a Pulse Secure Pulse Connect Secure log source on the JSA Console. The following tables describe the parameters that require specific values to collect Syslog events from Pulse Secure Pulse Connect Secure:

    Table 2: Pulse Secure Pulse Connect Secure Syslog Log Source Parameters

    Parameter

    Value

    Log Source type

    Pulse Secure Pulse Connect Secure

    Protocol Configuration

    Syslog

    Log Source Identifier

    Type a unique identifier for the log source.

  5. Optional. To add a Pulse Secure Pulse Connect Secure log source to receive syslog events from network devices that support TLS Syslog event forwarding, configure the log source on the JSA console to use the TLS Syslog protocol.

    The following table describes the parameters that require specific values to collect TLS Syslog events from Pulse Secure Pulse Connect Secure:

    Table 3: Pulse Secure Pulse Connect Secure TLS Syslog Log Source Parameters

    Parameter

    Value

    Log Source type

    Pulse Secure Pulse Connect Secure

    Protocol Configuration

    TLS Syslog

    Log Source Identifier

    Type a unique identifier for the log source.

    TLS Protocols

    Select the version of TLS that is installed on the client.