Arbor Networks Pravail

The JSA DSM for Arbor Networks Pravail receives event logs from your Arbor Networks Pravail servers.

The following table identifies the specifications for the Arbor Networks Pravail DSM:

To send Arbor Networks Pravail events to JSA, complete the following steps:

1. If automatic updates are not enabled, download and install the most recent version of the Arbor Networks Pravail RPM from the https://support.juniper.net/support/downloads/ onto your JSA console.

2. Configure each Arbor Networks Pravail system to send events to JSA.

3. If JSA does not automatically discover the Arbor Pravail system, create a log source on the JSA console. Configure the required parameters, and use the following table for the Arbor Pravail specific parameters:

   Table 2: Arbor Pravail Parameters

   Parameter	Value
   Log Source Type	Arbor Networks Pravail
   Protocol Configuration	Syslog

Configuring Your Arbor Networks Pravail System to Send Events to JSA

To collect all audit logs and system events from Arbor Networks Pravail, you must add a destination that specifies JSA as the syslog server.

1. Log in to your Arbor Networks Pravail server.
2. Click Settings & Reports.
3. Click Administration >Notifications.
4. On the Configure Notifications page, click Add Destinations.
5. Select Syslog.
6. Configure the following parameters:

   Table 3: Syslog Parameters

   Parameter	Description
   Host	The IP address of the JSA console
   Port	514
   Severity	Info
   Alert Types	The alert types that you want to send to the JSA console

7. Click Save.