Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Bit9 Security Platform

 

Use the JSA DSM for Carbon Black Bit9 Security Platform to collect events from Carbon Black Bit9 Parity devices.

The following table identifies the specifications for the Bit9 Security Platform DSM:

Table 1: DSM Specifications for Bit9 Security Platform

Specification

Value

Manufacturer

Carbon Black

DSM name

Bit9 Security Platform

RPM file name

DSM-Bit9Parity-build_number.noarch.rpm

Supported versions

V6.0.2 and up

Event format

Syslog

Supported event types

All events

Automatically discovered?

Yes

Included identity?

Yes

More information

Bit9 website (http://www.bit9.com)

To integrate Bit9 Security Platform with JSA, complete the following steps:

  1. If automatic updates are not enabled, download the most recent version of the Bit9 Security Platform DSM RPM.

  2. Configure your Bit9 Security Platform device to enable communication with JSA. You must create a syslog destination and forwarding policy on the Bit9 Security Platform device.

  3. If JSA does not automatically detect Bit9 Security Platform as a log source, create a Bit9 Security Platform log source on the JSA Console. Use the following Bit9 Security Platform values to configure the log source parameters:

    Log Source Identifier

    The IP address or host name of the Bit9 Security Platform device

    Log Source Type

    Bit9 Security Platform

    Protocol Configuration

    Syslog

Configuring Carbon Black Bit9 Security Platform to Communicate with JSA

Configure your Bit9 Security Platform device to forward events to JSA in LEEF format.

  1. Log in to the Bit9 Security Platform console with Administrator or PowerUser privileges.
  2. From the navigation menu, select Administration > System Configuration.
  3. Click Server Status and click Edit.
  4. In the Syslog address field, type the IP address of your JSA Console or Event Collector.
  5. From the Syslog format list, select LEEF (Q1Labs).
  6. Select the Syslog enabled check box and click Update.