Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Extreme Matrix Router

 

The Extreme Matrix Router DSM for JSA accepts Extreme Matrix events by using SNMPv1, SNMPv2, SNMPv3, and syslog.

You can integrate Extreme Matrix Router version 3.5 with JSA. JSA records all SNMP events, syslog login, logout, and login failed events. Before you configure JSA to integrate with Extreme Matrix, you must take the following steps:

  1. Log in to the switch/router as a privileged user.
  2. Type the following command:

    set logging server <server number> description <description> facility <facility> ip_addr <IP address> port <port> severity <severity>

    Where:

    • <server number> is the server number with values 1 - 8.

    • <description> is a description of the server.

    • <facility> is a syslog facility, for example, local0.

    • <IP address> is the IP address of the server that receives the syslog messages.

    • <port> is the default UDP port that the client uses to send messages to the server. Use port 514 unless otherwise stated.

    • <severity> is the server severity level with values 1 - 9, where 1 indicates an emergency, and 8 is debug level.

    For example:

    set logging server 5 description ourlogserver facility local0 ip_addr 1.2.3.4 port 514 severity 8

  3. You are now ready to configure the log source in JSA.

    Select Extreme Matrix E1 Switch from the Log Source Type list.