Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring a Log Source

 

JSA automatically discovers and creates a log source for syslog events from ISC BIND.

The following configuration steps are optional.

  1. Log in to JSA.
  2. Click the Admin tab.
  3. On the navigation menu, click Data Sources.
  4. Click the Log Sources icon.
  5. Click Add.
  6. In the Log Source Name field, type a name for your log source.
  7. In the Log Source Description field, type a description for the log source.
  8. From the Log Source Type list, select ISC BIND.
  9. Using the Protocol Configuration list, select Syslog.
  10. Configure the following values:

    Table 1: Syslog Protocol Parameters

    Parameter

    Description

    Log Source Identifier

    Type the IP address or host name for the log source as an identifier for events from your ISC BIND appliance.

  11. Click Save.
  12. On the Admin tab, click Deploy Changes.

    The configuration is complete.