Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Juniper Networks DX Application Acceleration Platform

 

The Juniper DX Application Acceleration Platform DSM for JSA uses syslog to receive events. JSA records all relevant status and network condition events. Before you configure JSA, you must configure your Juniper device to forward syslog events.

  1. Log in to the Juniper DX user interface.
  2. Browse to the wanted cluster configuration (Services - Cluster Name), Logging section.
  3. Select the Enable Logging check box.
  4. Select your log format.

    JSA supports Juniper DX logs by using the common and perf2 formats only.

  5. Select the log delimiter format.

    JSA supports comma delimited logs only.

  6. In the Log Host section, type the IP address of your JSA system.
  7. In the Log Port section, type the UDP port on which you want to export logs.
  8. You are now ready to configure the log source in JSA.

Configuring JSA to Receive Events from a Juniper DX Application Acceleration Platform

You can configure JSA to receive events from a Juniper DX Application Acceleration Platform.

  1. From the Log Source Type list, select the Juniper DX Application Acceleration Platform option.