Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

H3C Comware Platform

 

The JSA DSM for the H3C Comware Platform collects events from a number of network devices from H3C Technologies. JSA supports H3C Switches, H3C Routers, H3C Wireless LAN Devices, and H3C IP Security Devices.

The following table describes the specifications for the H3C Comware Platform DSM:

Table 1: H3C Comware Platform DSM Specifications

Specification

Value

Manufacturer

H3C Technologies Co., Limited

DSM name

H3C Comware Platform, H3C Switches, H3C Routers, H3C Wireless LAN Devices, and H3C IP Security Devices.

RPM file name

DSM-H3CComware-JSA_version-build_number.noarch.rpm

Supported versions

V7

Protocol

Syslog

Event format

NVP

Recorded event types

System

Automatically discovered?

No

Includes identity?

No

Includes custom properties?

No

More information

H3C%20Technologies (http://www.h3c.com)

To integrate H3C Comware Platform, H3C Switches, H3C Routers, H3C Wireless LAN Devices, or H3C IP Security Devices with JSA, complete the following steps:

  1. If automatic updates are not enabled, download and install the most recent version of the H3C Comware Platform DSM RPM on your JSA Console.

  2. Configure your H3C Comware Platform router or device to send syslog events to JSA.

  3. If JSA does not automatically detect the log source, add a H3C Comware Platform log source on the JSA Console. The following table describes the parameters that require specific values for H3C Comware Platform event collection:

    Table 2: H3C Comware Platform Log Source Parameters

    Parameter

    Value

    Log Source type

    H3C Comware Platform

    Protocol Configuration

    Syslog

The following table provides a sample syslog event message for the H3C Comware Platform DSM:

Table 3: H3C Comware Platform Sample Syslog Message

Event name

Low level category

Sample log message

A user's AAA request is rejected

AAA Session Denied

<188>Jun 14 17:11:11 2013
 HP %%10AAA/5/AAA_FAILURE: 
-AAAType=AUTHOR-AAADomain
=domain1-Service=login-
UserName=cwf@system; 
AAA is failed.

Configuring H3C Comware Platform to Communicate with JSA

To collect H3C Comware Platform events, enable syslog settings and configure a log host. H3C Switches, H3C Routers, H3C Wireless LAN Devices, and H3C IP Security Devices are supported by JSA.

  1. Log in to the command line interface by using the console port, or by using Telnet or SSH.

    For more information about login methods, see the Logging into the CLI section in the configuration guide for your H3C devices.

  2. To access the system view, type the <system_name> system-view command.
  3. To enable the syslog settings, type the following commands in the order that they are listed.
    1. info-center source default loghost deny

    2. info-center source AAA loghost level informational

    3. info-center source ACL loghost level informational

    4. info-center source FIPS loghost level informational

    5. info-center source HTTPD loghost level informational

    6. info-center source IKE loghost level informational

    7. info-center source IPSEC loghost level informational

    8. info-center source LOGIN loghost level informational

    9. info-center source LS loghost level informational

    10. info-center source PKI loghost level informational

    11. info-center source PORTSEC loghost level informational

    12. info-center source PWDCTL loghost level informational

    13. info-center source RADIUS loghost level informational

    14. info-center source SHELL loghost level informational

    15. info-center source SNMP loghost level informational

    16. info-center source SSHS loghost level informational

    17. info-center source TACACS loghost level informational

    18. info-center loghost <JSA Event Collector IP> 514

  4. To exit the system view, type the quit <system_name> command.