Import Devices into JSA Risk Manager
Use Device Import to add a list of adapters and their network IP addresses to the Configuration Source Manager using a comma-separated value file (.csv). You can easily do a bulk upload by using the CSV file.
The device import list can contain up to 5000 devices, but the list must contain one line for each adapter and its associated IP address in the import file.
<Adapter::Name 1>,<IP Address> <Adapter::Name 2>,<IP Address> <Adapter::Name 3>,<IP Address>
the manufacturer and device name, such as Cisco::IOS.
<IP Address> contains
the IP address of the device, such as 126.96.36.199.
Here's an example of a CSV file that lists the devices to import into the Configuration Source Manager in JSA Risk Manager:
Cisco::SecurityAppliance,10.225.80.1 Cisco::SecurityAppliance,10.225.78.3 CheckPoint::SecurePlatform,10.225.80.5 PaloAlto::PANOS,172.16.54.1 Sourcefire::3D,172.16.16.1
Table 1: Device Import Examples
Example <Adapter::Name>,<IP Address>
Cisco Security Appliance
Importing a CSV File
You can import a master device list to Configuration Source Management using a comma-separated value (CSV) file.
If you import a list of devices and then make a change to an IP address in the CSV file, then you might accidentally duplicate a device in the Configuration Source Management list. For this reason, delete a device from Configuration Source Management before re-importing your master device list.
- On the navigation menu, click Admin.
- Click Apps.
- In the Apps pane, click Device Import.
- Click Browse.
- Locate your CSV file, click Open.
- Click Import Devices.
If an error displays, then you need to review your CSV file to correct errors, and re-import the file. An import of the CSV file might fail if the device list is structured incorrectly or if the device list contains incorrect information. For example, your CSV file might be missing colons or a command, there could be multiple devices on a single line, or an adapter name might have a typo.
If the device import aborts, then no devices from the CSV file are added to Configuration Source Management.