Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Adding a nCircle IP360 Scanner

 

JSA uses a Secure Shell (SSH) to access a remote server (SSH export server) to retrieve and interpret the scan data from nCircle IP360 appliances. JSA supports VnE Manager version IP360-6.5.2 to 6.8.2.8.

This configuration requires the target settings that you recorded when you exported the XML2 scan data to the remote server.

If the scanner is configured to use a password, the SSH scanner server to which JSA connects must support password authentication. If it does not, SSH authentication for the scanner fails. Make sure the following line is displayed in your sshd_config file, which is typically found in the /etc/ssh directory on the SSH server: PasswordAuthentication yes. If your scanner server does not use OpenSSH, the configuration can differ. For more information, see the vendor documentation for your scanner.

  1. Click the Admin tab.
  2. Click the VA Scanners icon.
  3. Click Add.
  4. Configure the following nCircle IP360 parameters:

    Parameter

    Description

    Scanner Name

    The name to identify your nCircle IP360 instance.

    Managed Host

    The managed host from your JSA deployment that manages the scanner import.

    Type

    nCircle IP360

    SSH Server Host Name

    The IP address or host name of the remote server that hosts the scan result files.

    SSH Port

    The port number to connect to the remote server.

    Remote Directory

    The location of the scan result files.

    File Pattern

    The regular expression (regex) to filter the list of files that are specified in the Remote Directory field. To list all XML2 format files that end with XML, use the following entry: XML2.*\.xml

  5. Configure the remaining parameters.
  6. To configure a CIDR range for your scanner:
    1. Type the CIDR range that you want this scanner to consider or click Browse to select a CIDR range from the network list.

    2. Click Add.

  7. Click Save.
  8. On the Admin tab, click Deploy Changes.