Configuring a Log Source

JSA does not automatically discover or create log sources for syslog events from CRYPTOCard CRYPTO-Shield devices.

1. Log in to JSA.
2. Click the Admin tab.
3. On the navigation menu, click Data Sources.
4. Click the Log Sources icon.
5. Click Add.
6. In the Log Source Name field, type a name for your log source.
7. In the Log Source Description field, type a description for the log source.
8. From the Log Source Type list, select CRYPTOCard CRYPTOShield.
9. From the Protocol Configuration list, select Syslog.
10. Configure the following values:

    Table 1: Syslog Parameters

    Parameter	Description
    Log Source Identifier	Type the IP address or host name for the log source as an identifier for events from your CRYPTOCard CRYPTO-Shield device.

11. Click Save.
12. On the Admin tab, click Deploy Changes.