Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

NGINX HTTP Server

 

The JSA DSM for NGINX HTTP Server collects Syslog events from an NGINX HTTP Server device.

To integrate NGINX HTTP Server with JSA, complete the following steps:

  1. If automatic updates are not enabled, download and install the most recent version of the following RPMs on your JSA console

    • Apache HTTP Server DSM RPM

    • NGINX HTTP Server DSM RPM

  2. Configure your NGINX HTTP Server device to send syslog events to JSA.

  3. If JSA does not automatically detect the log source, add a NGINX HTTP Server on the JSA console. The following table describes the parameters that require specific values to collect syslog events from NGINX HTTP Server:

    Table 1: NGINX HTTP Server Log Source Parameters

    Parameter

    Value

    Log Source type

    NGINX HTTP Server

    Protocol Configuration

    Syslog

    Log Source Identifier

    The IPv4 address or host name that identifies the log source. If your network contains multiple devices that are attached to a single management console, specify the IP address of the individual device that created the event. A unique identifier, such as an IP address, prevents event searches from identifying the management console as the source for all of the events.