Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

BeyondTrust PowerBroker

 

The JSA DSM for BeyondTrust PowerBroker logs all events to a multi-line format in a single event log that is viewed by using Beyond Trust's pblog utility.

To integrate BeyondTrust PowerBroker with JSA, complete the following steps:

  1. If automatic updates are not enabled, download and install the most recent version of the BeyondTrust PowerBroker DSM RPMs on your JSA Console.
  2. Configure your BeyondTrust PowerBroker to communicate with JSA.
  3. If JSA does not automatically detect the log source, add a BeyondTrust PowerBroker log source on the JSA Console. The following tables describe the parameters that require specific values for BeyondTrust PowerBroker event collection:

Table 1: Syslog Log Source Parameters

Parameter

Value

Log Source type

BeyondTrust PowerBroker

Protocol Configuration

Syslog

Log Source Identifier

Type a unique IP address or host name.

Store Event Payload

Select this check box to enable or disable JSA from storing the event payload.

Automatically discovered log sources use the default value from the Store Event Payload list in the System Settings window, which is accessible on the Admin tab. However, when you create a new log source or update the configuration for an automatically discovered log source, you can override the default value by configuring this check box for each log source.

Table 2: TLS Syslog Log Source Parameters

Parameter

Value

Log Source type

BeyondTrust PowerBroker

Protocol Configuration

TLS Syslog

Log Source Identifier

Type a unique IP address or host name.