Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Trend Micro Deep Security


The JSA DSM for Trend Micro Deep Security can collect logs from your Trend Micro Deep Security server.

The following table identifies the specifications for the Trend Micro Deep Security DSM:

Table 1: Trend Micro Deep Security DSM Specifications




Trend Micro

DSM name

Trend Micro Deep Security

RPM file name



Supported versions




Event format

Log Event Extended Format

Recorded event types


Deep Security


Integrity Monitor

Intrusion Prevention

Log Inspection


Web Reputation

Automatically discovered?


Includes identity?


Includes custom properties?


More information

Trend Micro website (

To integrate Trend Micro Deep Security with JSA, complete the following steps:

  1. If automatic updates are not enabled, download and install the most recent version of the following RPMs on your JSA console:

    • Trend Micro Deep Security DSM RPM

    • DSMCommon RPM

  2. Configure your Trend Micro Deep Security device to send syslog events to JSA.

  3. If JSA does not automatically detect the log source, add a Trend Micro Deep Security DSM log source on the JSA Console. The following table describes the parameters that require specific values for Trend Micro Deep Security DSM event collection:

    Table 2: Trend Micro Deep Security DSM Log Source Parameters



    Log Source type

    Trend Micro Deep Security

    Protocol Configuration


Configuring Trend Micro Deep Security to Communicate with JSA

To collect all events from Trend Micro Deep Security, you must specify JSA as the syslog server and configure the syslog format.

Ensure that your Deep Security Manager is installed and configured.

  1. Click the Administration >System Settings >SIEM tab.
  2. From the System Event Notification (from the Manager) area, set the Forward System Events to remote computer (via Syslog) option.
  3. Type the host name or the IP address of the JSA system.
  4. Type 514 for the UDP port.
  5. Select the Syslog Facility that you want to use.
  6. Select LEEF for the Syslog Format.Note

    Deep Security can only send events in LEEF format from the Manager. If you select the Direct forward option on the SIEM tab, you cannot select Log Event Extended Format 2.0 for the Syslog Format.