Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Extreme 800-Series Switch

 

The Extreme 800-Series Switch DSM for JSA accepts events by using syslog.

JSA records all relevant audit, authentication, system, and switch events. Before you configure your Extreme 800-Series Switch in JSA, you must configure your switch to forward syslog events.

Configuring Your Extreme 800-Series Switch

Configuring the Extreme 800-Series Switch to forward syslog events.

To manually configure the Extreme 800-Series Switch:

  1. Log in to your Extreme 800-Series Switch command-line interface.

    You must be a system administrator or operator-level user to complete these configuration steps.

  2. Type the following command to enable syslog:

    enable syslog

  3. Type the following command to create a syslog address for forwarding events to JSA:

    create syslog host 1 <IP address> severity informational facility local7 udp_port 514 state enable

    Where: <IP address> is the IP address of your JSA Console or Event Collector.

  4. Type the following command to forward syslog events by using an IP interface address:

    create syslog source_ipif <name> <IP address>

    Where:

    • <name> is the name of your IP interface.

    • <IP address> is the IP address of your JSA console or Event Collector.

    The configuration is complete. The log source is added to JSA as Extreme 800-Series Switch events are automatically discovered. Events that are forwarded to JSA by Extreme 800-Series Switches are displayed on the Log Activity tab of JSA.

Configuring a Log Source

JSA automatically discovers and creates a log source for syslog events from Extreme 800-Series Switches.

The following configuration steps are optional. To manually configure a log source:

  1. Log in to JSA.
  2. Click the Admin tab.
  3. On the navigation menu, click Data Sources.
  4. Click the Log Sources icon.
  5. Click Add.
  6. In the Log Source Name field, type a name for your log source.
  7. In the Log Source Description field, type a description for the log source.
  8. From the Log Source Type list, select Extreme 800-Series Switch.
  9. Using the Protocol Configuration list, select Syslog.
  10. Configure the following values:

    Table 1: Syslog Parameters

    Parameter

    Description

    Log Source Identifier

    Type the IP address or host name for the log source as an identifier for events from your Extreme 800-Series Switch.

  11. Click Save.
  12. On the Admin tab, click Deploy Changes.

    The configuration is complete.