Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Juniper Networks JUNOS

 

To integrate JSA Risk Manager with your network devices, ensure that you review the requirements for the Juniper Networks JUNOS adapter.

The following features are available with the Juniper Networks JUNOS adapter:

  • Neighbor data support

  • SNMP discovery

  • OSPF dynamic routing

  • Static routing

  • Telnet and SSH connection protocols

The following table describes the integration requirements for the Juniper Networks JUNOS adapter.

Table 1: Integration Requirements for the Juniper Networks JJUNOS Adapter

Integration requirement

Description

Versions

10.4

11.2 to 12.3

13.2

SNMP discovery

Matches SNMP sysOID: 1.3.6.1.4.1.2636

Required credential parameters

To add credentials in JSA, log in as an administrator and use Configuration Source Management on the Admin tab.

Username

Password

Supported connection protocols

To add protocols in JSA, log in as an administrator and use Configuration Source Management on the Admin tab.

Use any one of the following supported connection protocols:

Telnet

SSH

SCP

Commands that the adapter requires to log in and collect data

show version

show system uptime

show chassis hardware

show chassis firmware

show chassis mac-address

show chassis routing-engine

show configuration snmp

show snmp mib walk system configure

show configuration firewall

show configuration firewall family inet6

show configuration security

show configuration security zones

show interfaces

show interfaces filters

show ospf interface detail

show bgp neighbor

show configuration routing-option

show arp no-resolve

show ospf neighbor

show rip neighbor