Adding a nCircle IP360 Scanner
JSA uses a Secure Shell (SSH) to access a remote server (SSH export server) to retrieve and interpret the scan data from nCircle IP360 appliances. JSA supports VnE Manager version IP360-6.5.2 to 22.214.171.124.
This configuration requires the target settings that you recorded when you exported the XML2 scan data to the remote server.
If the scanner is configured to use a password, the SSH scanner
server to which JSA connects must support password authentication.
If it does not, SSH authentication for the scanner fails.
Make sure the following line is displayed in your
sshd_config file, which is typically found in the
/etc/ssh directory on the SSH server:
yes. If your scanner server does not use
OpenSSH, the configuration can differ. For more information, see
the vendor documentation for your scanner.
- Click the Admin tab.
- Click the VA Scanners icon.
- Click Add.
- Configure the following nCircle IP360 parameters:
The name to identify your nCircle IP360 instance.
The managed host from your JSA deployment that manages the scanner import.
SSH Server Host Name
The IP address or host name of the remote server that hosts the scan result files.
The port number to connect to the remote server.
The location of the scan result files.
The regular expression (regex) to filter the list of files that are specified in the Remote Directory field. To list all XML2 format files that end with XML, use the following entry: XML2.*\.xml
- Configure the remaining parameters.
- To configure a CIDR range for your scanner:
Type the CIDR range that you want this scanner to consider or click Browse to select a CIDR range from the network list.
- Click Save.
- On the Admin tab, click Deploy Changes.