Installing the JSA Appliance
Administrators must install the JSA appliance to enable access to the user interface.
Before you install the JSA evaluation appliance, ensure that you have:
Space for a two-unit appliance.
Rack rails and shelving (mounted).
Optional: a USB keyboard and standard VGA monitor for console access.
- Connect the management network interface to the port labeled Ethernet 1.
- Plug the dedicated power connections into the rear of the appliance.
- If you need console access, connect the USB keyboard and standard VGA monitor.
- If the appliance has a front panel, remove the panel by pushing in the tabs on either side and pulling the panel away from the appliance.
- Power on the appliance.