Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring Event Forwarding for Open LDAP

 

You can configure syslog forwarding for Open LDAP:

  1. Log in to the command-line interface for your Open LDAP server.
  2. Edit the following file:

    /etc/syslog.conf

  3. Add the following information to the syslog configuration file:

    <facility>@<IP address>

    Where:

    <facility> is the syslog facility, for example local4.

    <IP address> is the IP address of your JSA console or Event Collector.

    For example,

    Note

    If your Open LDAP server stores event messages in a directory other than/var/log/messages, you must edit the directory path.

  4. Save the syslog configuration file.
  5. Type the following command to restart the syslog service:

    /etc/init.d/syslog restart

    The configuration for Open LDAP is complete. UDP multiline events that are forwarded to JSA are displayed on the Log Activity tab.