Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring a Log Source

    JSA automatically discovers and creates a log source for syslog events from Stonesoft Management Center.

    The following configuration steps are optional.

    1. Log in to JSA.
    2. Click the Admin tab.
    3. On the navigation menu, click Data Sources.
    4. Click the Log Sources icon.
    5. Click Add.
    6. In the Log Source Name field, type a name for your log source.
    7. In the Log Source Description field, type a description for the log source.
    8. From the Log Source Type list, select Stonesoft Management Center.
    9. Using the Protocol Configuration list, select Syslog.
    10. Configure the following values:

      Table 1: Syslog Parameters

      Parameter

      Description

      Log Source Identifier

      Type the IP address or host name for the log source as an identifier for events from your Stonesoft Management Center appliance.

    11. Click Save.
    12. On the Admin tab, click Deploy Changes.

      The configuration is complete.

    Modified: 2016-09-22