Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring a Log Source

 

JSA automatically discovers and creates a log source for syslog events from Redback ASE. The following configuration steps are optional.

To manually configure a log source for Redback ASE:

  1. Log in to JSA.
  2. Click the Admin tab.
  3. On the navigation menu, click Data Sources.

    The Data Sources pane is displayed.

  4. Click the Log Sources icon.

    The Log Sources window is displayed.

  5. Click Add.

    The Add a log source window is displayed.

  6. In the Log Source Name field, type a name for your log source.
  7. In the Log Source Description field, type a description for the log source.
  8. From the Log Source Type list, select Redback ASE.
  9. Using the Protocol Configuration list, select Syslog.

    The syslog protocol configuration is displayed.

  10. Configure the following values:

    Table 1: Syslog Parameters

    Parameter

    Description

    Log Source Identifier

    Type the IP address or host name for the log source as an identifier for events from your Redback ASE appliance.

  11. Click Save.
  12. On the Admin tab, click Deploy Changes.

    The configuration is complete.