Configuring a Log Source

JSA automatically discovers and creates a log source for syslog events from a Bridgewater Systems appliance.

The following configuration steps are optional.

1. Log in to JSA.
2. Click the Admin tab.
3. On the navigation menu, click Data Sources.
4. Click the Log Sources icon.
5. Click Add.
6. In the Log Source Name field, type a name for your log source.
7. In the Log Source Description field, type a description for the log source.
8. From the Log Source Type list, select Bridgewater Systems AAA Service Controller.
9. From the Protocol Configuration list, select Syslog.
10. Configure the following values:

    Table 1: Syslog Parameters

    Parameter	Description
    Log Source Identifier	Type the IP address or host name for the log source as an identifier for events from your Bridgewater Systems appliance.

11. Click Save.
12. On the Admin tab, click Deploy Changes.

    The configuration is complete.